Simple Salt Pool Water Care Guide
Simple Salt Pool Maintenance
Start the season by having your pool water professionally tested and adjust as needed. This is necessary for chemicals to work effectively as well as protecting your liner and Qpool equipment from premature wear!
Add Salt
Upon fresh water fill only, add 1 – 40lb. Bag of salt to pool. This is a one time deal. Do not add again in the future!
Add Simple Salt Prime
Weekly Maintenance
Add 1lb. of Simple Salt Shimmer per 10,000 gal. per week through the skimmer.
Add 1/2 pint of Simple Salt Vivid directly into the pool every week.
Test pool weekly with easy to use test strips.
Just dip and compare colors. Adjust pH, Alkalinity, and Calcium as needed.
Maintain a mineral level of .3 – .5. This takes about 3 days after initial start-up. Adjust dial on unit to increase or decrease.
Run The Pool
Clean filter as needed
Sand Filters: Only backwash when the pressure builds up or return flow slows down. Sand filters filter out finer particles as they clog up. If you keep the filter too clean it will not work efficiently!
Cartridge & DE Filters: Clean whenever the pressure builds up or return flow slows down. If you have a DE filter make sure to add DE every time you backwash!
Click the link below to download these instructions!
COLONIE
1967 Central Ave.
Albany, NY 12205
(518) 456-0958
HOURS:
Monday – Friday: 10am-5pm
Saturday: 10am-4pm
Sunday: 10am-3pm
BALLSTON SPA
2133 Doubleday Ave.
Ballston Spa, NY 12020
(518) 885-1131
HOURS:
Monday / Tuesday: 10am-5pm
Wednesday: CLOSED
Thursday / Friday: 10am-5pm
Saturday: 10am-4pm
Sunday: 10am-3pm
